|
ลิงค์ผู้สนับสนุน
รายะเอียดของประกาศ
Cable Glands Ex เคเบิ้ลแกลนด์
สำหรับเข้าสาย กันน้ำ ทนสารเคมี กันระเบิด ปลั๋กอุด stopping plug
Plastic Cable gland, Metal cable gland,Stainless steel Cable gland, Plastic Nylon cable gland, Cable Gland,เคเบิ้ลแกลน,Lock nut, เคเบิ้ลแกรน, cable gland คือ, hawke cable gland, CCG cable gland, explosion proof
bosston cable glands, cmp cable gland, OSCG Cable gland,shimada cable gland , cable gland size, plastic cable gland,cable gland pg16
cable gland cmp, Cable gland IP68, cable gland stainless, nylon cable gland, cable gland pg9, cable gland pg16
cable gland pg21, cable gland m20, cable gland m25, cable gland pg, explosion proof cable gland, Hawk cablegland,
สเปก Ex cable gland กันระเบิด (เคเบิ้ลแกลนด์กันระเบิด) Bosston ปากเกร็ด Armored Cablegland,Stainless steel Cable gland, cable gland, Cable Gland,เคเบิ้ลแกลน,Lock nut
stopping plug, stopping plug hawke, hawke stopping plug 387, hawke stopping plug 475,
สำหรับเข้าสาย กันน้ำ ทนสารเคมี กันระเบิด มีทุกขนาด ทุกชนิดเกลียว PG, M(Metric), NPT, G. ราคา
เคเบิ้ลแกลนกันระเบิดจากยุโรปมีสตอกในไทย ขนาดM12 M16 M20s M20 M25 M32 M40 M50
ปลั๋กอุด stopping plug M12 M16 M20s M20 M25 M32 M40 M50 ปลั๋กอุด
A2F Cable Gland, Flameproof Ex d, Increased Safety Ex and Restricted Breathing Ex nR Cable Gland
CMP Type A2F Triple Certified Flameproof (Type 'd'), Increased Safety (Type 'e') and Restricted Breathing (Type nR) indoor and outdoor cable gland for use in Zone 1, Zone 2,
Zone 21 and Zone 22 hazardous areas with un-armoured and braided cable providing a combined flameproof seal and environmental seal on the cable outer sheath.
This product provides full compatibility with restricted breathing equipment that rely upon flammable gases being excluded from the main enclosure.
All CMP Cable Glands are EMC Tested.
CWe Cable Gland (Explosion proof)
CMP Type CWe Increased Safety (Type 'e') cable gland for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Areas with Single Wire Armour (SWA) cable providing an environmental seal
on the cable outer sheath. The cable gland being suitable for armoured cables, provides mechanical cable retention and electrical continuity via armour wire termination.
All CMP Cable Glands are EMC Tested
A2 Cable Gland (Industrial)
CMP A2 type brass indoor and outdoor cable gland for use with all types of Unarmoured cable,
providing mechanical cable retention and an environmental seal on the cable outer sheath.
All CMP Cable Glands are EMC Tested
CW Cable Gland (Industrial)
CMP CW type brass indoor and outdoor cable gland for use with all types of Single Wire Armour (SWA) cable, providing environmental seal on the cable outer sheath.
All CMP Cable Glands are E NOTE: *CMP SOLO LSF Halogen Free Shrouds also available on request. + Alternative armour clamping range available for non-standard armour sizes.
TECHNICAL DATA
Marine Approvals
Type CW
Design Specification BS 6121:Part 1:1989, EN 50262:1999
Continuous Operating Temperature -60?C to +150?C
Ingress Protection Rating IP66
Cable Gland Material Brass, Electroless Nickel Plated Brass, Stainless Steel, Aluminium
Seal Material CMP Formulated Thermoplastic Elastomer
Cable Type Single Wire Armour (SWA)
Armour Clamping Armour Cone & AnyWay Universal Clamping Ring
Sealing Technique Unique CMP "LRS" TM Outer Seal (Load Retention Seal)
Sealing Area(s) Cable Outer Sheath
Accessories Adaptor/Reducer, Earth Tag, Locknut, Serrated Washer, Entry Thread Seal, Shroud
Gland Kits Available Gland kit for use with all types of SWA cable including 2 Brass Glands, 2 Steel Locknuts, 2 Brass Earth Tags and 2 PVC Shrouds for sizes up to and including 32mm. For sizes 40mm and above each kit includes 1 of each component.MC Tested.
PG-M type
Class:Metallic cable gland
? Material: Parts A, C, F are made of brass plated with nickel, part D is made of UL approved nylon
? Material: Parts A, C, F are made of brass plated with nickel, part D is made of UL approved nylon PA66, parts B and E are made of nitrile butadiene rubber (NBR).
? Thread spec.: Metric, PG, G, NPT.
? Working temperature: -40? to 100?, instantaneous heat resistance up to 120?.
? Characteristics: Special design of clamping die and rubber part, large range in clamping the cable, ultrastrong stretching resistance, waterproof, dustproof, and high ability to resist salt, acid, alkali, alcohol, greas
? Material: Parts A, C, F are made of brass plated with nickel, part D is made of UL approved nylon PA66, parts B and E are made of nitrile butadiene rubber
(NBR).
? Thread spec.: Metric, PG, G, NPT.
? Working temperature: -40? to 100?, instantaneous heat resistance up to 120?.
? Characteristics: Special design of clamping die and rubber part, large range in clamping the cable, ultrastrong stretching resistance, waterproof, dustproof, and high ability to resist salt, acid, alkali, alcohol, grease and general solvent.e and general solvent
R&R CABLE GLAND UL Standard
Plastic Cable gland
? Material: Parts A, C, E are made of UL approved nylonPA66, parts B and D are made of nitrile butadienerubber (NBR).
? Thread spec.: Metric, PG, G, NPT.
? Working temperature: -40? to 100? in static state,instantaneous heat resistance up to 120?; -20? to80?in dynamic state, instantaneous heat resistance upto 100?.
? Characteristics: Special design of clamping die andrubber part, large range in clamping cable, ultra-strongstretching resistance, waterproof, dustproof, and high ability to resist salt, acid, alkali, alcohol, grease andgeneral solvent.
? Color: Black(RAL9005), light grey (RAL7035), silver(RAL7001) as well as special colors that can be designed at request.
Metal cable gland
? Material: Parts A, C, F are made of brass plated with nickel, part D is made of UL approved nylon PA66, parts B and E are made of nitrile butadiene rubber
(NBR).
? Thread spec.: Metric, PG, G, NPT.
? Working temperature: -40? to 100?, instantaneous heat resistance up to 120?.
? Characteristics: Special design of clamping die and rubber part, large range in clamping the cable, ultrastrong stretching resistance, waterproof, dustproof, and high ability to resist salt, acid, alkali, alcohol, grease and general solvent.
Shrouds PVC Cablegland
CMP manufactures a range of push on shrouds which are used to minimise the risk of dirt or foreign substances gathering on the Cable Gland body, and/or point of cable to cable gland interface. Standard shrouds are produced in Black PVC and PCP. CMP SOLO LSF (Blue/Grey) Halogen Free shrouds are available from stock.
It should be noted that although the addition of a shroud may aid the process of keeping the surface of the cable gland free from the build up of dust or dirt, this does not necessarily improve the Ingress Protection rating of the installed cable gland. Generally cable glands are tested for ingress protection without a shroud being present. In certain conditions the addition of a shroud or other form of external covering may retain unwanted moisture creating a greater threat of penetration than that which it is intended to prevent. In such cases a CMP Deluge Proof cable gland is recommended which negates the need for the use of a shroud and protects the critical migration paths into the interior of the cable gland.
Colour Coded Shrouds
CMP Solo LSF OH Shrouds are manufactured in grey. PVC Shrouds are manufactured as standard in black - alternative colours including Red, Blue and White to suit a wide variety of customer requirements and other colours are available on request.
ข่าวอื่นๆ ที่เกี่ยวข้อง/น่าสนใจ
|
| ราคา
250
บาท |
| ลงประกาศโดย :
stang
, e-mail :
sales.willengineering@gmail.com
, Tel.
095-713-5771
|
ที่อยู่ :
111
ส่งข้อความเพื่อติดต่อผู้ลงประกาศนี้
VVVVV ถูกใจประกาศนี้กดเลย!!!
ถูกใจเว็บนี้กดเลย !!!!
VVVVV
|
|
